Cart …

Centralize roller shutters with Wattcube Window

The Wattcube Window command locally the roller shutter and it can also be commanded from a global switch with powerline communicationPowerline communication (CPL). From one end of the house to the other, unlike radiofrequency products, the powerline signal passes through the walls and floors.

Description

The Wattcube Window has 2 outputs and 2 inputs. Connect the two inputs with the existing switches (aimed switches for roller shutter). Connect the output on the four wires of the roller shutter (Earth, neutral, line 1, line 2). It can be easily integrated in renovation. Il s’intègre très facilement en rénovation. Command the roller shutter from a new switch or through Ethernet with the Wattcube Web, control it from level or from a home automation scenario.

Create a centralized switch from a Wattcube Push-2 binded with all Wattcube Window.

Here is how a roller shutter works.

Hardware

  • Roller shutter switch
    (reference LEG067601)
  • White front plate
    (référence LEG068151)

Programming

 

  • Once you have connected everything, pass the badge over the Wattcube Window so that the module determines the mechanical stops of the shutter. It then automatically go up and down to the check the stops.

 

  • Pass the badge over the Wattcube Push-2. The Wattcube Push-2 blinks.

 

  • Press the up switch. The LED of the Wattcube Window flashes blue

 

  • Pass the badge once in front of the Wattcube Window. The rise or fall (depending on the connection made and the direction of the shutter) is programmed. The led turns off. Pass the badge in the same way on the other Wattcube Window/li>

 

  • Passe again the badge over the Wattcube Push-2. The led switches off. The programming is stored in the Push-2 and in the Wattcube Window.

 

  • The Wattcube Push-2 blinks in blue

 

  • Press the down button. The LED of the Wattcube Window blinks in blue

 

  • Pass the badge twice over the Wattcube Window. The rise or fall (depending on the connection made and the direction of the shutter) is programmed. The led turns off. Pass the badge in the same way on the other Wattcube Window

 

  • Pass again the badge over the Wattcube Push-2. The blue led switches off. The programmaing is stored in Wattcube Push-2 and the Wattcube Window.